Search Results | GT | ASME Digital Collection

1-20 of 429

2 3 4 5

Sort by

Sort Order Select

Proceedings Papers

Experimental Validation of a Rotor-Bearings System Model for Tesla Turbines Resonances Prediction

Carlo Alberto Niccolini Marmont Du Haut Champ, Paolo Silvestri, Federico Reggio

Proc. ASME. GT2022, Volume 4: Cycle Innovations; Cycle Innovations: Energy Storage, V004T06A015, June 13–17, 2022

Paper No: GT2022-81710

DOI: https://doi.org/10.1115/GT2022-81710

View Paper

Topics: Ball bearings, Bearings, Finite element model, Resonance, Rotors, Stiffness, Turbines, Modal analysis, Analytical methods, Computer simulation

Proceedings Papers

Effect of Solidity and Aspect Ratio on the Aerodynamic Performance of Axial-Flow Fans With 0.2 Hub-to-Tip Ratio

Massimo Masi, Piero Danieli, Andrea Lazzaretto

Proc. ASME. GT2022, Volume 5: Education; Electric Power; Fans and Blowers, V005T10A010, June 13–17, 2022

Paper No: GT2022-82245

DOI: https://doi.org/10.1115/GT2022-82245

View Paper

Topics: Axial flow, Blades, Design, Fans, Engineering prototypes, Rotors, Pressure, Propellers, Experimental analysis

Proceedings Papers

Experimentally Validated Design of an Anode Recirculation Blower for PEM Fuel Cells Under Variable Fluid Composition

Philipp Nachtigal, Thorge Kentschke, Joerg R. Seume

Proc. ASME. GT2022, Volume 5: Education; Electric Power; Fans and Blowers, V005T10A006, June 13–17, 2022

Paper No: GT2022-80525

DOI: https://doi.org/10.1115/GT2022-80525

View Paper

Topics: Anodes, Design, Drops, Fluids, Hydrogen, Proton exchange membrane fuel cells, Turbomachinery, Compressors, Computational fluid dynamics, Construction

Proceedings Papers

Flow Design Using CFD for a Constant-Section Recursive Sequential Combustor

Andrea Hofer, Nina Paulitsch, Fabrice Giuliani

Proc. ASME. GT2022, Volume 10C: Turbomachinery — Design Methods and CFD Modeling for Turbomachinery; Ducts, Noise, and Component Interactions, V10CT32A029, June 13–17, 2022

Paper No: GT2022-82420

DOI: https://doi.org/10.1115/GT2022-82420

View Paper

Topics: Combustion chambers, Computational fluid dynamics, Design, Flow (Dynamics), Combustion, Engineering simulation, Simulation, Flames, Flue gases, Momentum

Proceedings Papers

Rotordynamic Design and Experimental Validation of a sCO2 Centrifugal Compressor Equipped With a Pocket Damper Seal

Giuseppe Vannini, Matteo Dozzini, Filippo Cangioli

Proc. ASME. GT2022, Volume 8B: Structures and Dynamics — Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration, V08BT26A001, June 13–17, 2022

Paper No: GT2022-79563

DOI: https://doi.org/10.1115/GT2022-79563

View Paper

Topics: Compressors, Dampers, Design, Vibration, Density, Carbon dioxide, Engineering prototypes, Fluids, Pistons, Stability

Proceedings Papers

Experimental Characterization of Losses in Bladeless Turbine Prototype

Avinash Renuke, Federico Reggio, Alberto Traverso, Matteo Pascenti

Proc. ASME. GT2021, Volume 4: Controls, Diagnostics, and Instrumentation; Cycle Innovations; Cycle Innovations: Energy Storage; Education; Electric Power, V004T06A011, June 7–11, 2021

Paper No: GT2021-59328

DOI: https://doi.org/10.1115/GT2021-59328

View Paper

Topics: Engineering prototypes, Experimental characterization, Turbines, Rotors, Stators, Accuracy and precision, Compressed air, Disks, Electricity (Physics), Energy generation

Proceedings Papers

Reducing Uncertainty in the Onset of Combustion Instabilities Using Dynamic Pressure Information and Bayesian Neural Networks

Michael McCartney, Ushnish Sengupta, Matthew Juniper

Proc. ASME. GT2021, Volume 3B: Combustion, Fuels, and Emissions, V03BT04A042, June 7–11, 2021

Paper No: GT2021-60283

DOI: https://doi.org/10.1115/GT2021-60283

View Paper

Topics: Artificial neural networks, Combustion, Pressure, Uncertainty, Hidden variables, Combustion chambers, Combustion systems, Emissions, Errors, Wall temperature

Proceedings Papers

Development of a Robust Scrubber Level Controller

Carolyn M. Day, Griffin C. Beck, Scott A. Schubring

Proc. ASME. GT2021, Volume 8: Oil and Gas Applications; Steam Turbine, V008T20A007, June 7–11, 2021

Paper No: GT2021-59078

DOI: https://doi.org/10.1115/GT2021-59078

View Paper

Topics: Control equipment, Control systems, Failure, Downtime, Engineering prototypes, Natural gas, Damage, Fluids, Gases, Hazards

Proceedings Papers

Proof-Of-Concept of a Thermal Barrier Coated Titanium Cooling Layer for an Inside-Out Ceramic Turbine

Antoine Gauvin-Verville, Patrick K. Dubois, Benoit Picard, Alexandre Landry-Blais, Jean-Sébastien Plante, Mathieu Picard

Proc. ASME. GT2021, Volume 6: Ceramics and Ceramic Composites; Coal, Biomass, Hydrogen, and Alternative Fuels; Microturbines, Turbochargers, and Small Turbomachines, V006T19A005, June 7–11, 2021

Paper No: GT2021-58869

DOI: https://doi.org/10.1115/GT2021-58869

View Paper

Topics: Ceramics, Cooling, Titanium, Turbines, Blades, Carbon, Polymers, Safety, Aeronautics, Aircraft

Proceedings Papers

Energy Management of a Hybrid-Electric Aeronautical Propulsion System to Be Used in a Stationary Test Bench

Manuel A. Rendon, Konstantinos Kyprianidis, Yipsy Roque Benito, Daniel de A. Fernandes, Ariele T. Ferraz, Luan R. C. Vieira

Proc. ASME. GT2020, Volume 5: Controls, Diagnostics, and Instrumentation; Cycle Innovations; Cycle Innovations: Energy Storage, V005T06A035, September 21–25, 2020

Paper No: GT2020-16133

DOI: https://doi.org/10.1115/GT2020-16133

View Paper

Topics: Energy management, Propulsion systems, Aircraft, Construction, Emissions, Greenhouse gases, Internal combustion engines, Propellers, Aerodynamics, Aircraft propulsion

Proceedings Papers

Experimental Assessment of a Sliding-Blade Inside-Out Ceramic Turbine

D. Thibault, P. K. Dubois, B. Picard, A. Landry-Blais, J.-S. Plante, M. Picard

Proc. ASME. GT2020, Volume 3: Ceramics; Coal, Biomass, Hydrogen, and Alternative Fuels, V003T02A005, September 21–25, 2020

Paper No: GT2020-15137

DOI: https://doi.org/10.1115/GT2020-15137

View Paper

Topics: Blades, Ceramics, Turbines, Reliability, Design, Engineering prototypes, Engines, Friction, Brayton cycle, Centrifugal force

Proceedings Papers

Influence of Key Design Parameters on the Aerodynamic Performance of a Centrifugal Compressor Volute for Turbocharger Applications

Pier Francesco Melani, Francesco Balduzzi, Alessandro Bianchini, Giovanni Ferrara, Pierre-Alain Hoffer, Stephane Montesino, Mattia Brenner

Proc. ASME. GT2020, Volume 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines, V008T20A018, September 21–25, 2020

Paper No: GT2020-15195

DOI: https://doi.org/10.1115/GT2020-15195

View Paper

Topics: Compressors, Design, Turbochargers, Shapes, Flow (Dynamics), Computational fluid dynamics, Computer-aided design, Diffusers, Engineering prototypes, Fluid dynamics

Proceedings Papers

Prospect and Challenges for Developing and Marketing a Brayton-Cycle Based Power Genset Gas-Turbine Using Supercritical CO 2 : Part II — The Turbomachinery Components Design Challenges

Abraham Engeda, Jinbo Chen

Proc. ASME. GT2020, Volume 6: Education; Electric Power, V006T08A003, September 21–25, 2020

Paper No: GT2020-14271

DOI: https://doi.org/10.1115/GT2020-14271

View Paper

Topics: Brayton cycle, Design, Gas turbines, Supercritical carbon dioxide, Turbomachinery, Fluids, Energy generation, Carbon capture and storage, Compressors, Cycles

Proceedings Papers

Physical Mechanisms Investigation of Sharkskin-Inspired Compressor Cascade Based on Large Eddy Simulations

Zhihui Li, Juan Du, Hongwu Zhang

Proc. ASME. GT2020, Volume 2A: Turbomachinery, V02AT32A046, September 21–25, 2020

Paper No: GT2020-15209

DOI: https://doi.org/10.1115/GT2020-15209

View Paper

Topics: Cascades (Fluid dynamics), Compressors, Large eddy simulation, Flow (Dynamics), Turbulence, Vortices, Pressure, Computer simulation, Design, Drag reduction

Proceedings Papers

Numerical Investigations on Full Blended Blade and Endwall Technique

Tongtong Meng, Lucheng Ji, Xin Li, Jiabin Li, Zhou Ling

Proc. ASME. GT2020, Volume 2A: Turbomachinery, V02AT32A070, September 21–25, 2020

Paper No: GT2020-16136

DOI: https://doi.org/10.1115/GT2020-16136

View Paper

Topics: Blades, Corners (Structural elements), Geometry, Boundary layers, Diffusion (Physics), Flow (Dynamics), Pressure gradient, Cascades (Fluid dynamics), Compressors, Design

Proceedings Papers

Theoretical and Experimental Investigation on Rotor Dynamic Behavior of Bladeless Turbine for Innovative Cycles

Paolo Silvestri, Alberto Traverso, Federico Reggio, Theofilos Efstathiadis

Proc. ASME. GT2019, Volume 3: Coal, Biomass, Hydrogen, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems, V003T06A025, June 17–21, 2019

Paper No: GT2019-91708

DOI: https://doi.org/10.1115/GT2019-91708

View Paper

Topics: Cycles, Rotors, Turbines, Disks, Computer simulation, Design, Energy harvesting, Engineering prototypes, Experimental analysis, Flow (Dynamics)

Proceedings Papers

Development and Initial Testing of a Radial Wave Engine

Pejman Akbari, Christopher J. Tait, Marc D. Polanka, Brian C. Sell

Proc. ASME. GT2019, Volume 4A: Combustion, Fuels, and Emissions, V04AT04A038, June 17–21, 2019

Paper No: GT2019-90608

DOI: https://doi.org/10.1115/GT2019-90608

View Paper

Topics: Engines, Testing, Waves, Combustion chambers, Combustion, Gas turbines, Pressure, Disks, Weight (Mass), Design

Proceedings Papers

Characterization of ALM Swirl Burner Surface Roughness and its Effects on Flame Stability Using High-Speed Diagnostics

Jon Runyon, Anthony Giles, Richard Marsh, Daniel Pugh, Burak Goktepe, Philip Bowen, Steve Morris

Proc. ASME. GT2019, Volume 4A: Combustion, Fuels, and Emissions, V04AT04A008, June 17–21, 2019

Paper No: GT2019-90215

DOI: https://doi.org/10.1115/GT2019-90215

View Paper

Topics: Flames, Stability, Surface roughness, Nozzles, Combustion, Gas turbines, Manufacturing, Turbulence, Air flow, Blasting

Proceedings Papers

Effect of Natural Gas Composition on Low NOx Burners Operation in Heavy Duty Gas Turbine

Serena Romano, Matteo Cerutti, Giovanni Riccio, Antonio Andreini, Christian Romano

Proc. ASME. GT2019, Volume 4A: Combustion, Fuels, and Emissions, V04AT04A058, June 17–21, 2019

Paper No: GT2019-90903

DOI: https://doi.org/10.1115/GT2019-90903

View Paper

Topics: Gas turbines, Natural gas, Nitrogen oxides, Emissions, Fuels, Combustion, Combustion chambers, Combustion technologies, Engineering prototypes, Engines

Proceedings Papers

Experimental Investigation of a RQL Burner With Jet in Cross Flow Fuel Injection: Characterization of the Reacting Flow Field at Realistic Operating Conditions

T. Soworka, T. Behrendt, C. Hassa, J. Heinze, E. Magens, M. Schroll, F. di Mare, S. Ballantyne, J. Gregory

Proc. ASME. GT2019, Volume 4B: Combustion, Fuels, and Emissions, V04BT04A016, June 17–21, 2019

Paper No: GT2019-91244

DOI: https://doi.org/10.1115/GT2019-91244

View Paper

Topics: Cross-flow, Flow (Dynamics), Fuels, Soot, Aircraft engines, Lasers, Carbon dioxide, Chemiluminescence, Combustion chambers, Combustion systems

2 3 4 5

NARROW

Experimental Validation of a Rotor-Bearings System Model for Tesla Turbines Resonances Prediction

Effect of Solidity and Aspect Ratio on the Aerodynamic Performance of Axial-Flow Fans With 0.2 Hub-to-Tip Ratio

Experimentally Validated Design of an Anode Recirculation Blower for PEM Fuel Cells Under Variable Fluid Composition

Flow Design Using CFD for a Constant-Section Recursive Sequential Combustor

Rotordynamic Design and Experimental Validation of a sCO2 Centrifugal Compressor Equipped With a Pocket Damper Seal

Experimental Characterization of Losses in Bladeless Turbine Prototype

Reducing Uncertainty in the Onset of Combustion Instabilities Using Dynamic Pressure Information and Bayesian Neural Networks

Development of a Robust Scrubber Level Controller

Proof-Of-Concept of a Thermal Barrier Coated Titanium Cooling Layer for an Inside-Out Ceramic Turbine

Energy Management of a Hybrid-Electric Aeronautical Propulsion System to Be Used in a Stationary Test Bench

Experimental Assessment of a Sliding-Blade Inside-Out Ceramic Turbine

Influence of Key Design Parameters on the Aerodynamic Performance of a Centrifugal Compressor Volute for Turbocharger Applications

Prospect and Challenges for Developing and Marketing a Brayton-Cycle Based Power Genset Gas-Turbine Using Supercritical CO 2 : Part II — The Turbomachinery Components Design Challenges

Physical Mechanisms Investigation of Sharkskin-Inspired Compressor Cascade Based on Large Eddy Simulations

Numerical Investigations on Full Blended Blade and Endwall Technique

Theoretical and Experimental Investigation on Rotor Dynamic Behavior of Bladeless Turbine for Innovative Cycles

Development and Initial Testing of a Radial Wave Engine

Characterization of ALM Swirl Burner Surface Roughness and its Effects on Flame Stability Using High-Speed Diagnostics

Effect of Natural Gas Composition on Low NOx Burners Operation in Heavy Duty Gas Turbine

Experimental Investigation of a RQL Burner With Jet in Cross Flow Fuel Injection: Characterization of the Reacting Flow Field at Realistic Operating Conditions

Journals

Conference Proceedings

eBooks

Resources

Opportunities

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only