We report an investigation of the total cooling effectiveness of a film cooled surface with staggered array impingement jet cooling using infra-red thermography. Heat transfer experiments were carried out using three film cooled test plates of different thermal conductivities: stainless steel (with a thermal conductivity, k = 13.4 W/mK), Corian® (k = 1 W/mK), and polycarbonate (k = 0.2 W/mK). The effects of conduction through the test plates and convective heat transfer due to the arrayed impingement jets were analyzed. The inclination angle of the film cooling holes was 35° and that of the impingement jet holes was 90°. The film and impingement jet holes on each plate were arranged in a staggered pattern, and the film cooling holes and impingement jet holes were also positioned in a staggered pattern. The jet Reynolds number based on the hole diameter was Rejet = 3,000 and the equivalent blowing rate was M = 0.3. The ratio of the target surface height to the hole diameter was varied in the range 1 < H/d < 5. The diameter of both the film cooling holes and impingement jet holes was 5 mm. The total cooling effectiveness was investigated with and without the impingement jets. When the impingement jets were added to the internal cooling, the averaged total cooling effectiveness was enhanced about 8.4%. The stainless steel plate was found to exhibit better cooling performance with more uniform temperature distribution. The total cooling effectiveness was increased up to 0.87 in the stainless steel plate, and the maximum deviation of total cooling effectiveness in the stainless steel was reduced to 85% from that in polycarbonate plate along the lateral direction. The total cooling effectiveness was related to the Biot number of the film cooled plate, however, the effect of the H/d ratio was not significant.
Skip Nav Destination
ASME Turbo Expo 2015: Turbine Technical Conference and Exposition
June 15–19, 2015
Montreal, Quebec, Canada
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-5671-0
PROCEEDINGS PAPER
Conjugate Heat Transfer on Full-Coverage Film Cooling With Array Impingement Jets
Eui Yeop Jung,
Eui Yeop Jung
Yonsei University, Seoul, Korea
Search for other works by this author on:
Heeyoon Chung,
Heeyoon Chung
Yonsei University, Seoul, Korea
Search for other works by this author on:
Seok Min Choi,
Seok Min Choi
Yonsei University, Seoul, Korea
Search for other works by this author on:
Hyung Hee Cho
Hyung Hee Cho
Yonsei University, Seoul, Korea
Search for other works by this author on:
Eui Yeop Jung
Yonsei University, Seoul, Korea
Heeyoon Chung
Yonsei University, Seoul, Korea
Seok Min Choi
Yonsei University, Seoul, Korea
Ta-kwan Woo
SUNG IL CO. LTD., Busan, Korea
Hyung Hee Cho
Yonsei University, Seoul, Korea
Paper No:
GT2015-43810, V05AT10A025; 9 pages
Published Online:
August 12, 2015
Citation
Jung, EY, Chung, H, Choi, SM, Woo, T, & Cho, HH. "Conjugate Heat Transfer on Full-Coverage Film Cooling With Array Impingement Jets." Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. Volume 5A: Heat Transfer. Montreal, Quebec, Canada. June 15–19, 2015. V05AT10A025. ASME. https://doi.org/10.1115/GT2015-43810
Download citation file:
66
Views
Related Proceedings Papers
Related Articles
An Experimental Evaluation of Advanced Leading Edge Impingement Cooling Concepts
J. Turbomach (January,2001)
An Efficient Localized Radial Basis Function Meshless Method for Fluid Flow and Conjugate Heat Transfer
J. Heat Transfer (February,2007)
Numerical and Experimental Investigation of Laminar Channel Flow With a Transparent Wall
J. Heat Transfer (June,2011)
Related Chapters
Radiation
Thermal Management of Microelectronic Equipment
What Is a Watt?
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Radiation
Thermal Management of Microelectronic Equipment, Second Edition